Differential Assembly: Specifications

Carrier Type		Integral
Ring Gear Pinion Backlash	Method	Shims Inch (in)
	Adjustment	.005-.008 Inch (in)
Pinion Bearing Preload	Method	Spacer
	New Bearings	24-32 Inch Pound-Force (in.lb) Note: Use inch-pound torque wrench on pinion shaft nut.
	Used Bearings	8-12 Inch Pound-Force (in.lb) Note: Use inch-pound torque wrench on pinion shaft nut.
Differential Bearing Preload	Method	Shims
	New Bearings	.008 Inch (in) Note: Slip fit plus 0.004 inch additional preload per side.
	Used Bearings	.008 Inch (in) Note: Slip fit plus 0.004 inch additional preload per side.