Water Pump: Service and Repair

EXC. 1984-88 CORVETTE

1. Disconnect battery ground cable and drain cooling system.
2. Remove fan shroud or upper radiator support, as applicable, then remove accessory drive belts.
3. Remove fan and pulley from water pump hub.
4. Remove upper and lower alternator brackets. On Camaro, remove AIR brace and bracket.
5. If equipped with power steering, remove power steering lower bracket from water pump and position aside.
6. Remove radiator lower hose and heater hose from water pump.
7. Remove water pump attaching bolts and pump, noting position of bolts for assembly.
8. Reverse procedure to install.