Installation

For additional information see Notes, Warnings, and Hints. Fundamentals and Basics

CAUTION: Brake fluid will damage painted surfaces. Shop cloths and clean containers should be used to prevent spillage of brake fluid.

Removing Master Cylinder Assembly:

1. Bench bleed master cylinder.
2. Install master cylinder assembly (21) to power booster assembly.
3. Tighten master cylinder assembly mounting nuts (20) to 27 Nm (20 lbs. ft.).
4. Tighten brake pipes tube nuts (22) to master cylinder assembly (21) to 20 Nm (11 lbs. ft.).

Brake Fluid Level Indicator:

5. Install electrical connector to fluid level sensor (1).
6. Fill master cylinder to proper level with clean DOT 3 brake fluid.
7. Bleed hydraulic system.