Steering and Suspension: Specifications

FRONT ALIGNMENT SPECIFICATIONS

(Figure 1) Front End Alignment Specifications:

NOTE: Vehicle must be jounced three times before checking alignment to eliminate false geometry readings.

(A) Front suspension "Z" dimension and rear suspension "D" dimension are held as indicated in Trim Height Measurements. Ride/Trim Height Measurement and Adjustment

Front end alignment specifications are indicated in image.

(B) Left and right side to be equal within 0.50 degree.

(C) Left and right side to be equal within 1.0 degree.

(D) Toe-in-left and right side to be set separately per wheel and steering wheel must be held in straight ahead position within ± 5.0 degree.