Intake Manifold: Service and Repair

Remove or Disconnect
1. Negative battery cable.
2. Air cleaner.
3. PCV valve and hose at TBI.
4. Coolant.
5. Fuel lines.
6. Vacuum hoses
7. From TBI assembly.
^ Wiring.
^ Throttle linkage.

8. Linkage - transaxle downshift.
9. Cruise control servo cable - if applicable.
10. Throttle and TV cable - place on one side for clearance.
11. Heater hose.
12. Retaining bolts and intake manifold.
Clean
^ All gasket surfaces on cylinder head and intake manifold.

Install or Connect
1. Intake manifold, with new gasket.
2. Retaining bolts and washers. Tighten to specification.
3. Heater hose.
4. Throttle and TV cable.
5. Cruise control servo cable, if fitted.
6. Linkage - transaxle downshift.
7. To TBI assembly.
^ Wiring.
^ Throttle linkage.

8. Vacuum hoses.
9. Fuel lines.
10. Engine coolant.
11. PCV valve and hose at TBI.
12. Air cleaner.
13. Negative battery cable.
Inspect
^ For fluid and vacuum leaks.