Condenser HVAC: Service and Repair

NOVA

1. Disconnect battery ground cable and discharge refrigerant.
2. Remove grille and hood lock brace.
3. Disconnect refrigerant lines from condenser, then plug lines and open fittings.
4. Remove 4 bolts securing the condenser and the condenser.
5. Reverse procedure to install, noting the following:
a. If condenser is being flushed or replaced, add 1.7 oz. of refrigerant oil to system.
b. Ensure that rubber insulators are properly positioned on flange when installing condenser.
c. Torque liquid line fitting to 10 ft. lbs. and flexible discharge line fitting to 16 ft. lbs.