Access Cover: Service and Repair

ENGINE COVER REPLACEMENT

REMOVE OR DISCONNECT
1. Nuts (2).
2. Screws (1).
3. Wiring connectors (if applicable).

Instrument Panel Extension:

4. Instrument panel extension (3).

Heater Duct:

5. Heater duct (4).
6. Bolt (5) from bracket (6).
^ Loosen nut (7) and rotate bracket Out of the way.
7. Latches (8).
8. Screws (9).

NOTICE: Screws are not designed to come out of the engine cover itself, on the cowl. Use care when moving the cover. The screws extending from the engine cover could cause damage to the instrument panel or trim.

Engine Cover Replacement:

9. Engine cover (10).

INSTALL OR CONNECT
1. Engine cover.
2. Screws (9).
^ Do not fully tighten.
3. Latches (8).
^ Tighten screws (9) fully.
^ Rotate bracket (6) into position.
4. Bolt (5).
5. Heater duct (4).
6. Instrument panel extension.
7. Wiring connectors (if applicable).
8. Screws (1).
9. Nuts (2).