Service Procedure

1. Raise vehicle.

2. Disconnect oxygen sensor electrical connector by releasing locking tab.

3. Carefully back out oxygen sensor from exhaust pipe.

4. Install new oxygen sensor P/N 25105901, and torque to 41 N-m (30 ft.lb.).

5. Connect oxygen sensor electrical connector.

6. Lower vehicle.

7. Install Campaign Identification Label.

CAMPAIGN IDENTIFICATION LABEL

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label." Each label provides a space to include the campaign number and five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ball point pen.