Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1992 >> Lumina APV V6-191 3.1L >> Repair and Diagnosis >> Windows and Glass >> Windows >> Window Regulator >> Service and Repair >> Power Window Regulator and Motor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Window Regulator and Motor Replacement


Power Window Regulator, Remove and Reinstall

Remove or Disconnect

1. Battery Ground Cable.
2. Door trim panel.
- Roll the window up, and apply cloth backed body tape from the window over the top of the door to the other side of the window. This is to hold the window in position when the regulator is removed.
3. Wiring harness from the regulator motor.
4. Regulator-to-door rivets.
- Use a 6mm (1/4-inch) drill bit to drill heads from rivets.
5. Regulator from door.
7. Power window regulator from motor.

Install or Connect

1. Motor to regulator.
- Lubricate the motor drive gear and the regulator sector teeth.
- Check the mesh of the motor to regulator before installing the rivets.
2. Rivets to motor and regulator.
3. Regulator to the door.
- Place the regulator into the door through the door access hole.
- Place the regulator arm roller into the sash and regulator rail.
- Push the regulator through the regulator door opening and align the holes in the regulator with the hole in the door.
4. Fasteners
- Use a 6mm (1/4-inch) diameter bolt, 13mm (1/2-inch) long, with a nylon inserted nut to reattach the regulator to the door.
5. Wiring harness from regulator to motor.
6. Trim panel.
7. Battery ground cable.
pro multis · About Operation CHARM