Fuel Filter: Service and Repair

WARNING: To reduce the risk of fire and personal injury when the fuel line is disconnected, cover the fuel line with a shop cloth to collect the fuel, and then place the cloth in an approved container.

REMOVE OR DISCONNECT
1. Fuel lines from filter using a back-up wrench to prevent filter, O-ring, or fuel line damage.
2. Fuel filter clamp bolt (if applicable).
3. Fuel filter from vehicle.

INSTALL OR CONNECT
1. New filter in position loosely.
2. Using new O-rings, install fuel lines into filter using a back-up wrench to prevent filter, O-ring, or fuel line damage.
3. Torque line fittings to 30 Nm (22 lb ft).
4. Secure filter in bracket or tighten clamp bolt.
5. Start engine and inspect for leaks.