Door Trim Panel

Remove or Disconnect

Tool Required:
J 9886-01 Door Handle Clip Remover

Handle Clip Removal:

Handle Clip Removal, Rear View:

1. Window regulator handle using J 9886-01.
2. Window regulator handle bezel.

Door Handle Clip Remover:

3. Inside door control assembly handle and bezel using J 9886-01.
4. Control assembly handle bezel.
5. Assist strap (if equipped).

Arm Rest:

6. Arm rest (if equipped).

Door Trim Outer Panel:

7. Door trim outer panel screws (if equipped).
8. Door trim outer panel (if equipped).
^ Pull the panel away from the retainers.

Door Trim Inner Panel:

9. Door trim inner panel screws.
10. Door trim inner panel.

Install or Connect

1. Door trim inner panel.
2. Door trim inner panel screws.
3. Door trim outer panel (if equipped).
^ Push the panel into the retainer.
4. Door trim outer panel screws (if equipped).
5. Arm rest (if equipped).
6. Assist strap (if equipped)
7. Inside door control assembly handle bezel.
8. Window regulator handle bezel.
9. The clips to the window regulator handle and the door lock control assembly handle.
10. Window regulator handle.
^ Push the handle onto the shaft.
11. Door lock control assembly handle.
^ Push the handle onto the shaft.