Ignition Coil: Service and Repair

Ignition Coil

Remove or Disconnect

- Make sure the ignition switch is "OFF."

1. Electrical connectors at the side of the ignition coil.
2. Ignition coil wire.
3. Nuts holding the ignition coil bracket and ignition coil to the engine.
4. Ignition coil bracket and ignition coil.
- Drill and punch out the two rivets holding the ignition coil to the bracket.
5. Ignition coil from the bracket.

Install or Connect

A replacement ignition coil kit comes with two screws to attach the ignition coil to the bracket.

1. Ignition coil to the bracket with two screws.
2. Ignition coil bracket to the engine bracket with studs and nuts.
3. Ignition coil wire.
4. Electrical connectors.