Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1994 >> G 10 Van V6-262 4.3L VIN Z >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

Control Module Mounting:






CAUTION:

- The ignition must be "OFF," when disconnecting or reconnecting the control module connector, to prevent internal damage to the control module.

- To prevent possible Electrostatic Discharge to the control module, DO NOT touch the connector pins or soldered components on the circuit boards.

NOTE: When replacing a production control module with a service controller, transfer the broadcast DTC and production control module part number to the controller label. DO NOT record information on the access cover.

REMOVAL:

- Disconnect the negative battery terminal.
- Remove control module mounting bracket under drivers seat. Lift and twist to remove from under seat.
- Disconnect control module harness connectors.
- Remove brackets and modules, if equipped.
- Remove access cover and PROM (MEM-CAL).

INSTALLATION:

- Install PROM (MEM-CAL) and access cover on to new control module.
- Install mounting brackets and module(s).
- Connect control module harness connectors.
- Install control module and bracket under driver seat.
- Connect the negative battery terminal.
- Perform functional check.
pro multis · About Operation CHARM