Label Installation Instructions

1. Open hood (C/K), or remove engine cover (P, G) of vehicle (please refer to your owner's manual for removal instructions).

2. Using a clean, dry cloth, wipe dirt, oil. etc. from the existing Emission Label on the side of the air cleaner.

3. Remove backing from the new label and apply over the existing label.

4. Beginning at the center of the label and using a clean, dry cloth, smooth and secure the new label. Any air bubbles can be removed by puncturing with a pin and smoothing with the cloth.

NOTICE:
Do not attempt to remove or loosen the new label once it has been applied, as this will deface the label.