Keyless Entry - Revised Terminal Identification

File In Section: 8 - Chassis/Body Electrical

Bulletin No.: 53-81-30

Date: October, 1995

SERVICE MANUAL UPDATE

Subject:
Section 8A - Revised Terminal Identification for Programming Keyless Entry Receiver Procedure

Models:
1995 Chevrolet Camaro
1995 Pontiac Firebird

This bulletin updates information found on page SA-132-15 of the 1995 Camaro/Firebird Driveability and Emissions, Electrical Diagnosis Service Manual (GMP/95-F-2).

Step # 1 under the procedure for "Programming the Keyless Entry Receiver" incorrectly states to: "Ground the program input line by connecting a fused jumper at Data Link Connector (DLC) from terminal "G" to terminal "A". The correct terminals to use are terminal "8" to terminal "4".

Please update the manual accordingly.