Service Procedure

1. Open hood and locate the caution label positioned on the radiator cover, rearward of the front grill (see illustration below).

2. Using a clean, dry cloth, wipe dirt, oil, etc. from existing caution label on the radiator cover panel.

3. Remove backing from new label and apply over existing caution label.

4. Beginning at center of label, and using a clean, dry cloth, smooth and secure new label. Any air bubbles can be removed by puncturing with a pin and smoothing with the cloth.

NOTICE:
DO NOT ATTEMPT TO REMOVE OR LOOSEN NEW LABEL ONCE IT HAS BEEN APPLIED AS THIS WILL DEFACE THE LABEL.





5. Install Campaign Identification Label.