Door Window Regulator Handle

DOOR WINDOW REGULATOR HANDLE

Door Window Regulator Handle:

TOOLS REQUIRED
^ J 9886-01 Regulator Handle Clip Remover

REMOVE OR DISCONNECT
1. Door window regulator handle in the upward position.
2. Insert tool J 9886-01 or equivalent between door window regulator handle and door trim panel and push downward.
3. Door window regulator handle.
4. Door window regulator handle bearing plate.

INSTALL OR CONNECT
1. Retaining clip to door window regulator handle.
2. Door window regulator handle bearing plate.
3. Door window in the closed position.
4. Push door window regulator handle to secure retaining clip.