Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Manifold Pressure/Vacuum Sensor: Testing and Inspection
A Tech 1 scan tool displays manifold pressure in kPa and Manifold Absolute Pressure
(MAP) sensor signal voltage. Low pressure (high vacuum) displays a low voltage while a high pressure (low vacuum) displays a high voltage. A fault in the MAP sensor circuit should set a Diagnostic Trouble Code
(DTC) 33 MAP Sensor Circuit (Signal Voltage High) or DTC 34 MAP Sensor Circuit (Signal Voltage LOW) and using the applicable chart will lead to the cause of the problem. A DTC 33 or 34 may set if a rough or unstable idle exists. Chart C-1D Manifold Absolute Pressure (MAP) Output Check can also be used to check the MAP sensor. Refer to
Testing and Inspection / Procedures.
Testing and Inspection