Throttle Position Sensor Learn Procedure

THROTTLE POSITION SENSOR LEARN PROCEDURE
If the Throttle Position (TP) sensor or throttle body is replaced, the Electronic Brake Transmission Control Module (EBTCM) must "learn" the TP sensor idle position voltage with the new component(s) installed. This is necessary to ensure effective engine torque reduction during ASR events. The procedure requires a T-1 (Tech 1) Scanner or T-1OO (CAMS) unit, and will be described using a Tech 1.

1. Ignition "OFF."
2. Connect Tech 1 with Mass Storage cartridge.
3. Ignition "ON."
4. Follow menus to reach ABS/ASR features.
5. Select "F5: TP SENSR LRN."
6. Press to begin learn procedure.
7. Wait for Tech 1 to indicate "COMPLETE."
8. Ignition "OFF."
9. Disconnect Tech 1.