Keyless Entry Module: Service and Repair

To Enable Mode 1 (Unlock driver's door when placed in park):

1. Ignition "ON."
2. Press Lock Switch for 10 seconds (lock followed by all unlock).
3. Release Lock Switch.
4. Press "UNLOCK" button on transmitter once (driver's door unlock).

To Enable Mode 2 (Unlock all doors when placed in park):

1. Ignition "ON."
2. Press Lock Switch for 10 seconds (lock followed by all unlock).
3. Release Lock Switch.
4. Press "UNLOCK" button on transmitter once (driver's door unlock).
5. Press "UNLOCK" button on transmitter again (all doors unlock).

To Enable Mode 3 (No action when placed in park).

1. Ignition "ON."
2. Press Lock Switch for 10 seconds (lock followed by all unlock).
3. Release Lock Switch.
4. Press "LOCK" button on transmitter once (all doors lock).

To Enable Mode 4 (No Automatic Door Lock Function):

1. Ignition "ON."
2. Press Lock Switch for 10 seconds (lock followed by all unlock).
3. Release Lock Switch.
4. Press "LOCK" button on transmitter once (all doors lock).
5. Press "LOCK" button on transmitter again (all doors lock again).

A ten second window exists after step 3, for programming to take place. The ten second window is exited by a ten second expiration or by turning the ignition "OFF."