Control Valve Assembly and Pressure Switch Install

1. Install the control valve body assembly to spacer plate gasket (22) onto the spacer plate (23).
2. Install the control valve body assembly (18) onto the transmission.





3. Inspect the pressure switch assembly (13) in order to verify the condition and correct location of the seven pressure switch O-rings.
4. If necessary replace the pressure switch O-rings.





5. Install the pressure switch assembly (13) onto the control valve assembly.





6. Install the eighteen control valve assembly bolts.





7. Hand start the bolts, then tighten the bolts to 12 N.m (9 lb ft).