Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1996 >> S10/T10 P/U 2WD L4-2.2L VIN 4 >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Service and Repair >> - With Standard Column >> Linear Shift Assembly - Disassemble
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Linear Shift Assembly - Disassemble






^ Tools Required:
- J 41352 Modular Column Holding Fixture
- J 41396 Park Lock Cable Pliers
- Or Equivalents

1. Do all installation steps Remove or disconnect, lower and upper shrouds.
2. Hexagon flanged head bolt (46).
3. Ball & actuator assembly (45).








4. Pop off locking ring on park lock cable assembly (48).
- Move park lock latch to gain access to lower oval head 6-lobed socket tap screw (47).
5. Two oval head 6-lobed socket tap screws (47) from shift gate.
6. Shift lever clevis (41).
a. Lift up on shift gate and rotate shift lever clevis (41).
b. Clevis (41) from gearshift lever assembly support bracket (49).
7. Park lock cable assembly (48) from support bracket (49). Insert retaining clip.
8. Pry actuator arm of electrical Brake Transmission Shift Interlock (BTSI) actuator (61) from outer shift cable ball stud on cable shift cam assembly (44).
9. Pry transaxle shift cable from inner ball stud on cable shift cam assembly (44).
10. Hexagon flange head bolt (46).
11. Cable shift cam assembly (44).
12. Cam bushing (63) from cable shift cam assembly (44).
13. Three flat head 6-lobed socket tap screws (43).
14. Gearshift lever assembly support bracket (49).
pro multis · About Operation CHARM