Spark Plug Wire Harness

REMOVAL PROCEDURE

Spark Plug Wire Wire Harness: Removal Procedure:

1. Disconnect the spark plug wires at each spark plug:
^ Twist each spark plug boot 1/2 turn.
^ Pull only on the boot in order to remove the wire from each spark plug.
2. Disconnect the spark plug wires from the ignition coil:
^ Twist each spark plug boot 1/2 turn.
^ Pull only on the boot in order to remove the wires from the ignition coil.

INSTALLATION PROCEDURE

Spark Plug Wire Wire Harness: Removal Procedure:

1. Install the spark plug wires at the ignition coil.
2. Install the spark plug wire to each spark plug.
3. Inspect the wires for proper installation:
^ Push sideways on each boot in order to inspect the seating.
^ Reinstall any loose boot.