Overhaul

Wheel Cylinder Components:

Remove or Disconnect
1. Bleeder valve (1).
2. Boots (4).
3. Pistons (3).
4. Seals (2).
5. Spring (5).

Inspect
^ Cylinder bore for scoring and corrosion.
^ Spring assembly for signs of discoloration due to heat. Replace if necessary.

Clean
^ Inside the cylinder bore with crocus-cloth. If the bore is still scored, replace the cylinder.
^ Cylinder with clean brake fluid.

Install or Connect
1. Lubricate the seals and cylinder bore with clean brake fluid.
2. Spring (5).
3. Seals (2).
4. Pistons (3).
5. Boots (4).
6. Bleeder Valve (1).
^ Tighten bleeder valve (1) to 13 Nm (110 inch lbs.).
7. Links (6).