Concentric Slave Cylinder Replacement

REMOVE OR DISCONNECT
1. Transmission.
2. Bolts securing the concentric slave cylinder to the clutch housing shaft.
3. Slave cylinder from the transmission input shaft.
4. Bearing from slave cylinder.

INSTALL OR CONNECT
1. Bearing to slave cylinder.
2. Slave cylinder to the transmission input shaft. Ensure that the bleed screw and coupling are positioned with the transmission ports.
3. Two bolts securing the concentric slave cylinder to the clutch housing shaft.
- Tighten concentric slave cylinder bolts to 8 Nm (71 inch lbs.).
4. Transmission.