Instrument Panel Extension

Removal Procedure

1. Remove the caps that cover the extension screws.
2. Remove the screws from the extension.
3. Remove the nuts at the bottom of the extension.
4. Pull toward the rear of the vehicle in order to remove the extension from the instrument panel.
5. Disconnect the electrical connectors.

Installation Procedure

1. Connect the electrical connectors.
2. Install the extension to the instrument panel:
2.1. Align the retainers.
2.2. Press the extension into place until the retainers are seated.
3. Install the nuts that retain the extension to the floor.

Tighten
Tighten the nuts that retain the extension to 8 N.m (71 lb in).

4. Install the retaining screws.

Tighten
Tighten the retaining screws to 8 N.m (71 lb in).

5. Install the extension screw covers.