A/C System

Remove or Disconnect

1. Instrument panel cluster trim plate.
2. Control assembly from instrument panel.
^ One retaining screw from left edge of control assembly.
^ Pivot control assembly from the instrument panel.
^ Pull control assembly out of the instrument panel far enough to reach the vacuum and electrical connectors.
3. Electrical connectors.
4. Vacuum connectors.

Install or Connect

1. Vacuum connectors.
2. Electrical connectors.
3. Control assembly to the instrument panel.
4. Electrical connectors.
5. Vacuum connectors.
6. Control assembly to instrument panel.
^ Pivot assembly on the right end into the instrument panel.
^ One retaining screw to the left edge of control assembly.