Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Fastener Tightening Specifications - Main Bearing
^Tighten Bolts to 70 Nm (52 lb. ft.) to fully seat the
crankshaft main bearing caps.
^Loosen the bolts 360°
^Tighten the bolts to 20 Nm (15 lb. ft.), then 40 degrees (30 lb. ft.)
^Use J36660 to tighten the bolts in steps:
35° + 35° + 40° for a total of 110°
^Install side bolts torque to 15 Nm (11lb. ft.) + 45°