Service Specifications

Housing Flatness Maximum 0.076 mm (0.0030 inch)
Bore Roundness 0.025 mm (0.0009 inch)
Housing Bore 33.025 - 33.050 mm (1.3001 - 1.1801 inch)
Shaft Journal OD 29.950 - 29.975 mm (1.1791 - 1.1801 inch)
Journal Taper:
Intentional Towards Counterweight 0.012 mm (0.00047 inch)
Journal Roundness Maximum 0.005 mm (0.0002 inch)
Bearing Clearance 0.044 - 0.111 mm (0.0017 - 0.0044 inch)
Shaft Groove Width 3.23 - 3.40 mm (0.127 - 0.134 inch)
Thrust Plate Thickness 2.945 - 3.045 mm (0.1159 - 0.1199 inch)
Endplay 0.185 - 0.455 mm (0.0073 - 0.0179 inch)