Defrost and Mode Valves

Heater Module - Disassembled View (1 Of 2):

(2 Of 2):

Remove or Disconnect

1. Negative battery cable.
2. Instrument panel pad.
3. Air distribution duct.
4. Valve housing cover from module.
5. Mode valve actuator link from mode valve.
6. Mode valve from module.
7. Defrost valve actuator link from defrost valve.
8. Defrost valve from module.

Install or Connect

1. Defrost valve to module.
2. Defrost valve actuator link to defrost valve.
3. Mode valve to module.
4. Mode valve actuator link to mode valve.
5. Valve housing cover.

Tighten
^ Screws to 1 N.m (9 lb in).

6. Air duct.
7. Instrument Panel pad.
8. Negative battery cable.

Tighten
^ Bolt to 16 N.m (12 lb ft).