Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1998 >> Corvette V8-5.7L VIN G >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Keyless Entry Transmitter >> Keyless Entry Transmitter Battery >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry Transmitter Battery: Service and Repair

REMOVAL PROCEDURE

Transmitter Battery Replacement: Removal Procedure:




1. Place the transmitter (2) face down on a clean surface.
2. Insert a small screwdriver or coin into the slot (1) on the side of the transmitter.
3. Carefully turn the screwdriver in the slot until the cover releases.
4. Remove the cover while being careful not to damage the seal.
5. Remove the battery from the transmitter.

INSTALLATION PROCEDURE

Transmitter Battery Replacement: Installation Procedure:




1. Install the new battery (CR 2450 or equivalent) with the positive (+) side facing up.
2. Inspect that the seal is properly positioned.
3. Snap the two halves together.
4. Synchronize the transmitter to the receiver. Refer to Transmitter Programming/Synchronization.
pro multis · About Operation CHARM