Fastener Tightening Specifications - Cylinder Head

Cylinder Head Bolts:
(First Pass all M 11 Bolts in Sequence) 30 Nm (22 lb ft)
(Second Pass all M 11 Bolts in Sequence) 76 degrees
(Final Pass all M 11 Bolts in Sequence-Excluding the Medium Length Bolts at the Front and Rear of Each Cylinder Head) 76 degrees
(Final Pass all M 11 Bolts at the Front and
Rear of Each Cylinder Head) 34 degrees
Cylinder Head Bolts (M 8 Inner Bolts in Sequence) 30 Nm (22 lb ft)
Cylinder Head Coolant Plug 20 Nm (15 lb ft)
Cylinder Head Core Hole Plug 20 Nm (15 lb ft)