Control Module Learning Ability & Reprogramming (Flashing)

CONTROL MODULE LEARNING ABILITY
The control module has a learning ability which allows the control module to make corrections for minor variations in the fuel system in order to improve driveability. Whenever the battery cable is disconnected, the learning process resets.

The driver may note a change in vehicle performance. In order to allow the PCM to re-learn to drive the vehicle at part throttle with moderate acceleration. The vehicle may also operate at idle conditions until the normal performance returns.

REPROGRAMMING (FLASHING) THE CONTROL MODULE
Some vehicles allow the reprogramming of the control module without removal from the vehicle. This provides a flexible and a cost-effective method of making changes in software and calibrations.

^ Refer to the latest Techline information on reprogramming or flashing procedures.