System Specifications

COOLING SYSTEM TIGHTENING SPECIFICATIONS
Coolant Outlet to Intake Manifold Bolt or Stud 28 Nm (21 lb. ft.)
Coolant Recovery Reservoir Bolts 10 Nm (89 lb. in.)
Coolant Temperature Sensor 23 Nm (17 lb. ft.)
Drive Belt Tensioner Bolt 50 Nm (37 lb. ft.)
Engine Oil Cooler Line Bracket Bolt 9 Nm (71 lb. in.)
Engine Oil Cooler Line Clamp Nut 13 Nm (115 lb. in.)
Engine Oil Cooler Line Clip Bolt 6 Nm (53 lb. in.)
Engine Oil Cooler Line Fittings 24 Nm (18 lb. ft.)
Fan Clutch Nut to Water Pump Stud 56 Nm (41 lb. ft.)
Fan Clutch to Water Pump Stud Nuts 24 Nm (18 lb. ft.)
Fan to Fan Clutch Bolts 23 Nm (17 lb. ft.)
Hose Support Bolt (5.7L Engine) 15 Nm (11 lb. ft.)
Idler Pulley Bolt 50 Nm (37 lb. ft.)
Lower Fan Shroud Bolts 9 Nm (71 lb. in.)
Radiator Inlet Hose Support Bolt (5.7L) 3 Nm (27 lb. in.)
Upper Fan Shroud Bolts 9 Nm (71 lb. in.)
Water Pump Bolts 41 Nm (30 lb. ft.)