Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter Solenoid: Service and Repair

REMOVAL PROCEDURE




1. Remove the starter from the vehicle.
2. Scribe matchmarks (2) on the solenoid and the drive housing to ensure proper solenoid installation.




3. Remove the retaining nut and the field coil lead wire (2) from the solenoid.




4. Remove the 2 screws and the solenoid (1) from the drive housing.

INSTALLATION PROCEDURE




1. Lightly grease the solenoid plunger with Lubricate lubricant GM P/N 1050109, or the equivalent.
2. Install the solenoid to the drive housing, aligning the matchmarks (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.




3. Install the 2 screws.

Tighten
Tighten the solenoid (1) mounting screws to 7 N.m (62 lb in).




4. Install the field coil lead wire (2) and the retaining nut to the solenoid.
5. Install the starter to the vehicle.