Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1998 >> S10/T10 P/U 2WD L4-2.2L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> NV3500 (RPO MG5 & M50) Manual Transmission >> Unit Repair >> Four Wheel Drive (4WD) >> Input Shift Bearing Retainer Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Input Shift Bearing Retainer Assembly

REMOVAL PROCEDURE





Remove the seal from the main drive gear bearing retainer. Pry the seal out with a small pry bar or the equivalent.

INSTALLATION PROCEDURE

- Tools Required
- J 38807 Main Drive Gear Bearing Retainer Seal Installer





Install the oil seal into the main drive gear bearing retainer. The lip of the seal goes toward the installing tool. Use the J 38807.

pro multis · About Operation CHARM