Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Idle Speed/Throttle Actuator - Electronic: Service and Repair




Removal Procedure
1. Remove the three throttle cover bolts.
2. Remove the throttle cover.
3. Disconnect the IAC valve air intake hose.
4. Disconnect the IAC valve electrical connector (2).
5. Disconnect the coolant hoses (3) from the IAC valve (1).
6. Remove the two bolts (4) from the IAC valve (1) to the intake manifold.
7. Remove the IAC valve (1) from the intake manifold.

Installation Procedure
1. Install the IAC valve and new gasket to the intake manifold.
2. Secure the IAC valve with two bolts (4) and tighten the to 18-28 Nm (13.5-20 lb ft).
3. Connect the two coolant hoses (3) to the IAC valve.
4. Connect the IAC valve electrical connector (2).
5. Connect the IAC valve air intake hose to the IAC valve.
6. Install the throttle cover.
7. Install the three throttle cover bolts and tighten to 15 Nm (11 lb ft).