Press Twice

The remote control door lock receiver activates the door unlock output at cavity B in order to unlock all of the doors. The remote control door lock receiver supplies the battery voltage to the coil of the unlock relay in the door lock relay. Battery voltage applies through CKT 194 (WHT). The unlock relay energizes and closes the contacts. Battery voltage is available to the following motors:
^ The right front door
^ The side door
^ The motors ground through the contacts of the lock switch. The lock switch is inside the door lock relay assembly. The motors run unlocking the following doors:
^ The right front door
^ The side door
^ The remote control door lock receiver supplies battery voltage to the door lock motors. The left front door lock motor receives voltage from cavity A. Voltage from the unlock side of the lock relay is supplied on CKT 294 (TAN) to cavity H of the receiver. The receiver is then signaled to supply voltage to the rear door motor through cavity G on CKT 246 (TAN). The rear door motor is then grounded through the lock side of the relay.