Right
Air Distributor Duct Replacement - Right Defogger
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
IMPORTANT: Do not remove the instrument panel.
2. Roll the instrument panel down. Refer to IP Carrier Replacement in Instrument Panel and Gauges.
3. Remove the screws that retain the duct.
4. Remove the duct from the instrument panel.
INSTALLATION PROCEDURE
1. Install the duct to the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws in order to retain the duct.
Tighten
Tighten the duct retaining screws to 2 N.m (18 lb in).
3. Roll the instrument panel up. Refer to IP Carrier Replacement in Instrument Panel and Gauges.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
4. Connect the negative battery cable.