Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1999 >> C 2500 Suburban 2WD V8-6.5L DSL Turbo VIN F >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Flow Meter/Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Flow Meter/Sensor: Service and Repair

REMOVAL PROCEDURE




1. Loosen the turbocharger inlet duct clamp at the intake duct.
2. Disconnect the MAF sensor electrical connector.




3. Unfasten the air cleaner cover clips.




4. Remove the air filter MAF sensor, and intake duct assembly from the air cleaner box.
5. Remove the air filter from the MAF sensor by pulling them apart.

Description:




6. Loosen the intake duct clamp and remove the intake duct from the MAF sensor.
7. Remove the air filter adapter screws.
8. Remove the air filter adapter from the MAF sensor.

INSTALLATION PROCEDURE

Description:




1. Install the air filter adapter to the MAF sensor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the 2 air filter adapter screws.

Tighten
Tighten the screws to 2.8 N.m (25 lb in).

3. Install the intake duct to the MAF sensor.
4. Tighten the intake duct clamp.
5. Install the air filter onto the air filter adapter.




6. Install the air filter, MAF sensor, and intake duct assembly into the air cleaner box.




7. Fasten the air cleaner cover clips.




8. Install the turbocharger inlet duct onto the intake duct.
9. Tighten the clamp.




10. Connect the MAF sensor electrical connector.
pro multis · About Operation CHARM