Control Lever Handle Assembly

Removal Procedure





1. Remove the front floor console. Refer to Console Replacement - Front Floor in Instrument Panel, Gauges and Warning Indicators.
2. Remove the control lever handle bolt (2).
3. Remove the control lever handle (1).

Installation Procedure





1. Install the control lever handle (1) to the shift control.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the control lever handle bolt (2).
^ Tighten the control lever handle bolt (2) to 25 Nm (18 ft. lbs.).
3. Install the front floor console. Refer to Console Replacement - Front Floor in Instrument Panel, Gauges and Warning Indicators.