Using A T50/T60/T20+

1. Using the T50/T60/T20+, enter the Service Programming System (SPS).
2. Select Terminal to Vehicle Programming.
3. Select Done and follow instructions on Vehicle Set-up screen
4. Select Vehicle Theft Re-learn.
5. Follow the instructions on the remaining screens.
^ The PCM and the Passlock control module will prepare for a re-learn.
^ A security timer will be ON for approximately 10 minutes.
^ When the PCM and the Passlock control module are prepared to re-learn, turn the ignition OFF for 30 seconds and then start the engine.