Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1999 >> Tracker 2WD L4-1.6L VIN 6 >> Repair and Diagnosis >> Maintenance >> Drive Belt >> Service and Repair >> A/C Compressor Drive Belt
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

A/C Compressor Drive Belt


Removal Procedure
1. Loosen the A/C compressor mounting bolts.
2. Pivot the A/C compressor towards the engine in order to relieve the tension on the belt.





3. Remove the A/C compressor drive belt (1) from the pulleys.

Installation Procedure





1. Properly route and install the A/C compressor drive belt (1) on the A/C compressor, the power steering (if equipped), and the crankshaft pulleys.

Notice: Refer to Fastener Notice in Service Precautions.





2. Adjust the A/C compressor drive belt to obtain 6-9 mm (0.24-0.35 inch) deflection.
Tighten the A/C compressor mounting bolts to 18-28 Nm (13-20 ft. lbs.).

pro multis · About Operation CHARM