Engine Scan Tool Data List

Engine Scan Tool Data List:

The Engine Scan Tool Data List contains all engine related parameters that are available on the scan tool. The list is arranged in alphabetical order.

Use the Engine Scan Tool Data List only after performing the following inspections:
^ Powertrain On-Board Diagnostic System Check is completed.
^ No Diagnostic Trouble Codes (DTCs) are present.
^ On-board diagnostics are functioning properly.

Scan tool values from a properly running engine may be used for comparison with the engine you are diagnosing. The Engine Scan Tool Data List represents values that would be seen on a normal running engine.

IMPORTANT: Do not use a scan tool that displays faulty data. Report the scan tool problem to the manufacturer. Use of a faulty scan tool can result in misdiagnosis and unnecessary parts replacement.

Only the parameters listed below are referenced in this service manual for use in diagnosis. If all values are within the typical range described below, refer to service category Symptoms for diagnosis.