Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1999 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Brake Caliper Bracket Replacement >> Brake Caliper Bracket Replacement-Rear (Export)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Caliper Bracket Replacement-Rear (Export)

Removal Procedure





1. Remove the brake caliper (3).
2. Remove the brake pads from the brake caliper bracket.
3. Remove the brake pad retainers from the brake caliper bracket (1).





4. Remove the brake caliper bracket bolts (2).
5. Remove the brake caliper bracket (1).
6. Remove the brake caliper bolt boots (3) from the brake caliper bracket (1).
7. Remove the brake caliper bolt bushings (4) from the brake caliper bracket (1).
8. Inspect and replace the brake caliper bracket if cracks or deformation damage exists.
9. Use a wire brush in order to clean away any rust and debris from the brake caliper bracket where the brake pads contact the brake caliper bracket.
10. Use a wire brush in order to clean away any rust and debris from the brake pads where the brake pads contact the brake caliper bracket.

Installation Procedure





1. Install the brake caliper bracket (1).

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the caliper bracket bolts.
^ Tighten the brake caliper bracket bolts to 125 Nm (92 lb ft).
3. Install the brake pad retainers to the brake caliper bracket.
4. Apply a thin coat of silicone grease (GM P/N 18010909 or equivalent) to the brake pad retainers where the brake pads contact the brake pad retainers.
5. Lubricate the brake caliper bolt bushings (4) with silicone grease (GM P/N 18010909 or equivalent).
6. Install the brake caliper bolt bushings (4) to the brake caliper bracket.
7. Lubricate the brake caliper bolt boots (3) with silicone grease (GM P/N 18010909 or equivalent).
8. Install the brake caliper bolt boots to the brake caliper bracket.
9. Install the brake caliper.
pro multis · About Operation CHARM