Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1999 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Crankshaft Position (CKP) Sensor Replacement (24X)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position (CKP) Sensor Replacement (24X)

24X Crankshaft Position (CKP) Sensor:





REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Remove the serpentine drive belt from crankshaft pulley.
3. Raise the vehicle on hoist.
4. Remove RH splash shield.
5. Remove the crankshaft harmonic balancer retaining bolt.
6. Remove the crankshaft harmonic balancer using special tool (J 24420-B).
7. Note the routing of sensor harness before removal.
8. Remove the harness retaining clip with bolt (1).
9. Remove the sensor electrical connector.
10. Remove the sensor bolts (2).
11. Remove the sensor.

INSTALLATION PROCEDURE
1. Install the 24X Crankshaft Position Sensor with bolts (2) and route harness as noted during removal.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the harness retaining clip with bolt (1).

Tighten
Tighten the bolts to 10 N.m (8 lb ft).

3. Install the sensor electrical connector.
4. Install the balancer on the crankshaft using special tool (J 29113).
5. Apply thread sealer GM #1052080 or equivalent to threads of the crankshaft harmonic balancer bolt.

Tighten
Tighten the bolt to 150 N.m (110 lb ft).

6. Reinstall RH splash shield.
7. Lower vehicle.
8. Install the serpentine drive belt.
pro multis · About Operation CHARM