Assist Step Pad Replacement

Assist Step Pad Replacement

Removal Procedure





1. Raise the vehicle to a suitable height.
2. Remove the assist step pad nuts.
3. Remove the assist step pad as follows:

1. Insert a plastic tool along the edge.
2. Pull upward on the assist step pad until it is fully released from the assist step plate.




Installation Procedure





1. Install the assist step pad as follows:

1. Align the assist step pad to the assist step plate and press downward firmly until seated.
2. The assist step pad nuts are to be hand torque.


Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the assist step pad nuts

Tighten the assist step pads nuts to 8 N.m (71 lb in).

3. Lower the vehicle.