Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Door Switch: Service and Repair




REMOVAL PROCEDURE
1. Loosen the nut on the door jamb switch.
2. Gently pull the switch away from the body.
3. Disconnect the door jamb switch from the electrical connector(s).
4. Tape the wiring to the body in order to prevent the wiring from entering the hole in the door pillar.
5. Remove the door jamb switch from the vehicle.

INSTALLATION PROCEDURE
1. Install the door jamb switch to the vehicle.
2. Connect the electrical connector(s) to the door jamb switch.

NOTE: Refer to Fastener Notice in Service Precautions

3. Tighten the nut on the door jamb switch.

Tighten
Tighten the door jamb switch nut to 3 N.m (27 lb in).