Lower Control Arm Bushings Replacement

Removal Procedure

Tools Required
- J 9519-E Ball Joint Remover and Installer Set
- J 36618 Lower Control Arm Bushing Service Set

1. Remove the lower control arm. Refer to Lower Control Arm Replacement.
2. Remove the front bushing.
2.1. Unbend the crimps using a punch.
2.2. Remove the bushing using the J 36618-2, the J 9519-23, the J 36618-4, and the J 36618-1.
3. Remove the rear bushing (no crimp). Remove the bushing using the J 36618-5, the J 36618-3, the J 36618-2, and the J 9519-23.

Installation Procedure
1. Install the front bushing using the J 36618 and the J 9519-23. After installing the bushing, crimp the bushing into place.
2. Install the rear bushing using the J 36618 and the J 9519-23.
3. Install the lower control arm. Refer to Lower Control Arm Replacement.