Keyless Entry System Description

The Remote Keyless Entry (RKE) system consists of a three button remote control transmitter and a receiver located within the instrument panel cluster. When you push any of the buttons on the transmitter, the transmitter sends a coded, ultra-high frequency signal to the receiver. This signal locks or unlocks the vehicle doors and releases the liftgate window. The transmitter must be within ten meters (33 ft) of the vehicle.

The transmitters are supplied in pairs with each vehicle. Each transmitter is attached to a key ring and acts as a key fob. Replacement transmitters are available, however each receiver will only recognize two transmitters. Therefore, if a transmitter is replaced, the new transmitter must be synchronized to the receiver. A 3 volt battery powers each transmitter. The transmitters are water resistant.

The RKE has no effect on the normal operation of the power door locks or the liftgate window release.